Track
Pedal Spacers for Clutch and Brake Pedals
Bora Akyol wrote:
> Does anyone else have a clutch pedal that has two pedals (one about 1
> inch on top of the other) stacked?
>
> I noticed this about a month ago, the difference between the height of
> the clutch and the brake pedals is making left foot braking harder.
Factory Option - 15mm or 30 mm Brake/Clutch Pedal Vertical Height Adjustment.
Basically a bolt on spacer that attaches to the top of the pedal, the pedals have pre-drilled holes for this (you can remove the rubber pedal covers to see the holes). It takes about 2 minutes to install (1 minute for autos). The spacers are attached and then the rubber pedal covers go over the spacers the same as they did on the original pedal surface.
5-Speed Cars need the following for 15mm of adjustment
2 x 928.423.207.00 Spacer Plates
2 x 481.945.529 - Nuts
2 x 900.067.057.02 - Bolts
2 x 900.114.021.01 Lock Washers
5-Speed Cars need the following for 30mm of adjustment
4 x 928.423.207.00 Spacer Plates
2 x 481.945.529 - Nuts
2 x 900.067.081.02 - Bolts
2 x 900.114.021.01 Lock Washers
Auto Cars need the following for 15mm of adjustment
1 x 928.423.213.00 Spacer Plate
1 x 481.945.529 - Nut
1 x 900.067.057.02 - Bolt
1 x 900.114.021.01 Lock Washer
Auto Cars need the following for 30mm of adjustment
2 x 928.423.213.00 Spacer Plate
1 x 481.945.529 - Nut
1 x 900.067.081.02 - Bolt
1 x 900.114.021.01 Lock Washer
Hope that helps,
David Roberts
928 SPECIALISTS