Climate Control

Illumination of Slider Knobs

Illumination of Slider Knobs

This evening as I was fumbling around in the dark looking for the HVAC controls, it occurred to me there might be lights in the levers... are there supposed to be?



There is a single, small bulb in the center of the controller that lights the panel and also the sliders via fiber-optic tubes. Remove the controller, take off the top, remove the gear attached to the temp slider and pull out the bulb. You can replace it with a 1.2 watt, Osram # 2721 W2x4,6d which should be available at any auto parts store.

Good Luck

Don Burrows

928 Tips Home     Greg's Home